Contact Us | E-Mail | Comments













TRANSMISSION BELTING SECTOR

NYLON SANDWICH BELTING
These belts are ideally suited for various applications such as :-

TEXTILE WOLLEN KNITTING WOODEN PAPER
MARBLE GRANITE INDUSTRIES AS WELL AS ANY KIND OF
ENGINGEERING INDUSTRIES.

OUR PRODUCTS :-

  • RUBBER NYLON SANDWICH BELTS.
  • LEATHER NYLON SANDWICH BELTS.
  • LEATHER NYLON FABRIC BELTS.
  • FABRIC NYLON FABRIC BELTS.
  • SYNTHETIC SPINDLE TAPE.
  • CONDENSOR TAPE.
  • COMBING LEATHER.
  • KNITTING MACHINE BELTS.

Nylon Sandwich Belt Product Description:-

  • This product comes under the category of Power transmission industry.
    As the name indicates, ‘Nylon’ is used as sandwich.

  • This product runs on ‘Plain Pulley’ whereas V-Belts runs on ‘Grooved Pulley’ which means in any textile/paper industry where V-Belt is used, there is requirement of this product.

  • Nylon is used as sandwich in this product as in today’s world, nylon has maximum strength, controlled Elongation, more durability as well as life.

  • ‘Rubber-Nylon-Rubber’ category is used in any type of textile industries in various machines under different drives as well as in any kind of Engineering Industries.

  • ‘Leather-Nylon-Leather’ category is used in any type of paper, textile, wooden, marble industries and certain other industries where oil/lubricants spillage exists as leather has all the properties to absorb oil as well as in any kind of Engineering Industries.

  • Both the above mentioned categories are having requirements in certain widths like 50/100/150/200/250/300 mm etc. and in open lengths in rolls of 50, 100 metres.

  • We can manufacture this product in maximum width of 300 mm and in rolls of 50, 100 metres & above.
    We manufacture both the above mentioned categories in high quality, most competitive prices and on the top at par with World class manufacturers like Habasit, Nitta etc.

Advantages and Special Features of MTS Flat Belts :-

  • Extensively High Tensile Strength.
  • No permanent Elongation.
  • High Efficiency.
  • Steady overall thickness.
  • Light weight, reduce bearing loads.
  • High co-efficient of friction.
  • Wide Range of Power Transmission from 0.5 HP to 200 HP.

RUBBER NYLON SANDWICH BELTING

Product Code Construction Thickness
MTS 50R 12 Green-Black 1.20 mm
MTS 50R 15 Blue-Grey 1.50 mm
MTS 50R18 Green-Yellow 1.80 mm
MTS 50R 20 Black-Light Blue 2.00 mm
     
MTS 75R 20 Light Green-Yellow 2.00 mm
MTS 75R 22 Green-Yellow 2.20 mm
MTS 75R25 Green-Yellow 2.50 mm
MTS 75R 28 Green-Yellow 2.80 mm
     
MTS 100R 25 Blue-Grey 2.50 mm
MTS 100R 30 Green-Yellow 3.00 mm
     
MTS 200R 32 Black-Light Blue 3.20 mm
MTS 200R 35 Green-Yellow 3.50 mm
MTS 200R 40 Blue-Grey 4.00 mm
  • Friction surface material is NBR elastomer.
  • Back surface material is NBR elastomer.
  • For MTS 50R 12, 1.20mm thickness belt, friction surface material is NBR
    elastomer and back surface material is NBR film.
  • The belt is having Anti-static properties.
  • The minimum pulley diameter at 20 deg. C is 25mm for product code MTS 50R ,
    40mm for MTS 75R, 60mm for MTS 100R, 110mm for MTS 200R.
  • The belt factor is 5 N/mm at 1% elongation for product code MTS 50R,
    7.50 N/mm for MTS 75R, 10 N/mm for MTS 100R, 15 N/mm for MTS 200R.

LEATHER NYLON SANDWICH BELTING

 

Product Thickness
MTS 50LL 4.25 mm
MTS 75LL 4.75 mm
MTS 100LL 5.00 mm
MTS 200LL 6.40 mm
MTS 300LL 7.50 mm
MTS 400LL 8.25 mm
  • Friction surface material is Chrome leather.
  • Back surface material is Chrome leather.
  • The belt factor is 5 N/mm at 1% elongation for product code MTS 50LL,
    7.50 N/mm for MTS 75LL, 10 N/mm for MTS 100LL, 15 N/mm for MTS 200LL,
    23 N/mm for MTS 300LL, 30.50 N/mm for MTS 400LL.

LEATHER NYLON FABRIC BELTING

Product Code Thickness
MTS 50LT 3.10 mm
MTS 75LT 3.40 mm
MTS 100LT 3.60 mm
MTS 200LT 4.40 mm
MTS 300LT
 5.50 mm
MTS 400LT 6.40 mm
  • Friction surface material is Chrome leather.
  • Back surface material is Black coated Fabric.
  • The belt factor is 5 N/mm at 1% elongation for product code MTS 50LT,
    7.50 N/mm for MTS 75LT, 10 N/mm for MTS 100LT, 15 N/mm for MTS 200LT,
    23 N/mm for MTS 300LT, 30.50 N/mm for MTS 400LT.

FABRIC NYLON FABRIC BELTING

Product Code Construction Thickness
MTS 20F Red coated-Red coated 0.80 mm
MTS 40F Black coated-Black coated 1.10 mm
MTS 80F Red coated-Red coated 1.50 mm
  • Friction surface material is NBR film.
  • Back surface material is NBR film.
    The belt factor is 2 N/mm at 1% elongation for product code MTS 20F,
  • 4 N/mm for MTS 40F, 6.50 N/mm for MTS 80F.

SYNTHETIC SPINDLE TAPE


Product Code Construction Thickness
MTS S-0 Green-Yellow 0.55 mm
MTS S-1 Green-Yellow 0.85 mm
  • Friction surface material is NBR film.
  • Back surface material is Texture.
  • The minimum pulley diameter at 20 deg. C is 15mm for product code MTS S-0
    and 15mm for MTS S-1.
  • The belt factor is 1.25 N/mm at 1% elongation for product code MTS S-0 and
    2 N/mm for MTS S-1.

Note : Apart from above given belt types, we can also produce other types as required by the buyer on the basis of specifications.